Avil Page (Posts about macbook)

MacBook - Natural Scrolling for Mouse

Anand Reddy Pandikunta — Tue, 30 Sep 2025 18:20:58 GMT

Problem

If we connect a mouse to macOS, the scrolling direction changes to "unnatural" for the mouse. This is because macOS has a single setting for natural scrolling that applies to both trackpad and mouse.

Solution

To have natural scrolling for both trackpad and mouse, we can use third-party tools like UnnaturalScrollWheels.

If we already use Karabiner-Elements, we can use it to set natural scrolling for mouse separately.

Open Karabiner-Elements and go to the "Devices" tab, select your mouse, and click on "Open mouse settings".

In the mouse settings, check the "Flip mouse vertical wheel" option.

Now, both trackpad and mouse will have natural scrolling.

Raycast replaced 10 macOS apps

Anand Reddy Pandikunta — Mon, 30 Jun 2025 15:51:21 GMT

Since I started using Raycast, I have replaced many macOS apps with it. Here is a list of those apps and their Raycast equivalents.

Espanso

Instead of using Espanso for text expansion, I now use Raycast's built-in text snippets feature.

Hotkey

I used to use Hotkey to assign keyboard shortcuts to various actions. Now, I use Raycast's built-in hotkeys feature to achieve the same functionality.

Fly Cut

I used to use Fly Cut for clipboard management, but now I rely on Raycast's clipboard history feature to access my clipboard items quickly.

FinderGO

I used to use FinderGO to quickly navigate to specific folders in Finder. Now, I use Raycast's built-in file navigation feature to achieve the same functionality.

Rectangle

To move and resize windows, I used to use Rectangle. Now, I use Raycast's built-in window management feature to achieve the same functionality.

Textbar

Instead of using Textbar to copy TOTP for two-factor authentication, I now use Raycast's extension "One Time Password" to generate and copy TOTP codes directly.

Caffenate

To prevent my Mac from sleeping, instead of using Caffenate, I now use Raycast's built-in "Caffeinate" command to keep my Mac awake.

Calculator

Instead of using Python prompt for basic arithmetic calculations, I now use Raycast's built-in calculator feature to perform quick calculations. This is super convenient and saves me from opening a separate calculator app.

Hammer Spoon (partially)

To assign shortcuts to browser urls, shell scripts, and other actions, I used to use Hammer Spoon. Now, I use Raycast's built-in scripting capabilities to create custom commands and assign shortcuts to them.

Terminal (partially)

For things like killing processes, installing packages, and running shell commands, I used to rely on Terminal. Now, I use Raycast's built-in terminal integration to run shell commands directly from the Raycast interface.

Conclusion

With Raycast, I have been able to streamline my workflow by replacing multiple macOS apps with its powerful features.

macOS - Log & track historical CPU, RAM usage

Anand Reddy Pandikunta — Fri, 31 May 2024 20:18:02 GMT

In macOS, we can use inbuilt Activity Monitor or third party apps like Stats to check the live CPU/RAM usage. But, we can't track the historical CPU & memory usage. sar, atop can track the historical CPU & memory usage. But, they are not available for macOS.

Netdata

Netdata¹ is an open source observability tool that can monitor CPU, RAM, network, disk usage. It can also track the historical data.

Unfortunately, it is not stable on macOS. I tried installing it on multiple macbooks, but it didn't work. I raised an issue² on their GitHub repository and the team mentioned that macOS is a low priority for them.

Glances

Glances³ is a cross-platform monitoring tool that can monitor CPU, RAM, network, disk usage. It can also track the historical data.

We can install it using Brew or pip.

$ brew install glances

$ pip install glances

Once it is installed, we can monitor the resource usage using the below command.

$ glances

Glances can log historical data to a file using the below command.

$ glances --export-csv /tmp/glances.csv

In addition to that, it can log data to services like influxdb, prometheus, etc.

Let's install influxdb and export stats to it.

$ brew install influxdb
$ brew services start influxdb
$ influx setup

$ python -m pip install influxdb-client

$ cat glances.conf
[influxdb]
host=localhost
port=8086
protocol=http
org=avilpage
bucket=glances
token=secret_token

$ glances --export-influxdb -C glances.conf

We can view stats in the influxdb from Data Explorer web UI at http://localhost:8086.

Glances provides a prebuilt Grafana dashboard⁴ that we can import to visualize the stats.

From Grafana -> Dashboard -> Import, we can import the dashboard using the above URL.

Conclusion

In addition to InfluxDB, Glances can export data to ~20 services. So far, it is the best tool to log, track and view historical CPU, RAM, network and disk usage in macOS. The same method works for Linux and Windows as well.

Automating Zscaler Connectivity on macOS

Anand Reddy Pandikunta — Tue, 14 May 2024 02:19:53 GMT

Introduction

Zscaler is a cloud-based security service that provides secure internet access via VPN. Unfortunately, Zscaler does not provide a command-line interface to connect to the VPN. We can't use AppleScript to automate the connectivity as well.

Automating Zscaler Connectivity

Once Zscaler is installed on macOS, if we search for LaunchAgents & LaunchDaemons directories, we can find the Zscaler plist files.

$ sudo find /Library/LaunchAgents -name '*zscaler*'
/Library/LaunchAgents/com.zscaler.tray.plist


$ sudo find /Library/LaunchDaemons -name '*zscaler*'
/Library/LaunchDaemons/com.zscaler.service.plist
/Library/LaunchDaemons/com.zscaler.tunnel.plist
/Library/LaunchDaemons/com.zscaler.UPMServiceController.plist

To connect to Zscaler, we can load these services.

#!/bin/bash

/usr/bin/open -a /Applications/Zscaler/Zscaler.app --hide
sudo find /Library/LaunchAgents -name '*zscaler*' -exec launchctl load {} \;
sudo find /Library/LaunchDaemons -name '*zscaler*' -exec launchctl load {} \;

To disconnect from Zscaler, we can unload all of them.

#!/bin/bash

sudo find /Library/LaunchAgents -name '*zscaler*' -exec launchctl unload {} \;
sudo find /Library/LaunchDaemons -name '*zscaler*' -exec launchctl unload {} \;

To automatically toggle the connectivity, we can create a shell script.

#!/bin/bash

if [[ $(pgrep -x Zscaler) ]]; then
    echo "Disconnecting from Zscaler"
    sudo find /Library/LaunchAgents -name '*zscaler*' -exec launchctl unload {} \;
    sudo find /Library/LaunchDaemons -name '*zscaler*' -exec launchctl unload {} \;
else
    echo "Connecting to Zscaler"
    /usr/bin/open -a /Applications/Zscaler/Zscaler.app --hide
    sudo find /Library/LaunchAgents -name '*zscaler*' -exec launchctl load {} \;
    sudo find /Library/LaunchDaemons -name '*zscaler*' -exec launchctl load {} \;
fi

Raycast is an alternative to default spotlight search on macOS. We can create a script to toggle connectivity to Zscaler.

#!/bin/bash

# Required parameters:
# @raycast.schemaVersion 1
# @raycast.title toggle zscaler
# @raycast.mode silent

# Optional parameters:
# @raycast.icon ☁️

# Documentation:
# @raycast.author chillaranand
# @raycast.authorURL https://avilpage.com/

if [[ $(pgrep -x Zscaler) ]]; then
    echo "Disconnecting from Zscaler"
    sudo find /Library/LaunchAgents -name '*zscaler*' -exec launchctl unload {} \;
    sudo find /Library/LaunchDaemons -name '*zscaler*' -exec launchctl unload {} \;
else
    echo "Connecting to Zscaler"
    /usr/bin/open -a /Applications/Zscaler/Zscaler.app --hide
    sudo find /Library/LaunchAgents -name '*zscaler*' -exec launchctl load {} \;
    sudo find /Library/LaunchDaemons -name '*zscaler*' -exec launchctl load {} \;
fi

Save this script to a folder. From Raycast Settings -> Extensions -> Add Script Directory, we can select this folder, and the script will be available in Raycast.

We can assign a shortcut key to the script for quick access.

Conclusion

Even though Zscaler does not provide a command-line interface, we can automate the connectivity using the above scripts.

Setup FTP server on Mac OS X

Anand Reddy Pandikunta — Tue, 30 Apr 2024 18:04:14 GMT

On Linux & Mac OS X, Python comes pre-installed. On Windows, we can install it from Windows store or from https://python.org website.

We can verify the Python version using the below command.

$ python --version
Python 3.11.6

We can use the pyftpdlib library to create an FTP server. We can install the library using the below command.

$ python -m pip install pyftpdlib
[I 11:28:21] concurrency model: async
[I 11:28:21] masquerade (NAT) address: None
[I 11:28:21] passive ports: None
[I 11:28:21] >>> starting FTP server on :::2121, pid=99951 <<<

Now, we can start the FTP server using the below command.

$ python -m pyftpdlib

It will start the FTP server on port 2121. We can connect to the FTP server using the below command.

$ ftp localhost 2121

The Strange Case of Dr. Linux and Mr. Mac

Anand Reddy Pandikunta — Sat, 30 Mar 2024 04:23:53 GMT

Few days back, some of the tests started failing on CI server. When I tried to run the tests locally, they were passing.

After debugging for a while, I found that the tests were failing because of the case sensitivity of the file system. One of the developer was using Linux and had committed 2 files with the same name but different case(config.json, Config.json).

Linux file system is case-sensitive. So these 2 files will be shown as 2 different files.

But Mac/Windows file system is case-insensitive. Out of these 2 files, only one file will be shown.

Due to this, the tests were failing on Linux but passing on Mac. Once the case of the file was corrected, the tests started passing on both the systems.

I have been using Mac for a long time and never faced this issue. Even though Mac's APFS is case-insensitive, we can create a case-sensitive volume using Disk Utility.

We have to be aware of these differences when working on a project with developers using different OS.

Remap F4 to Raycast, Alfred (cmd + space)

Anand Reddy Pandikunta — Thu, 30 Nov 2023 18:03:16 GMT

On Mac keyboard, there is F4 key which opens Spotlight¹ by default. I use Raycast² a lot instead of Spotlight and wanted to remap F4 to Raycast.

There is an app called Karabiner-Elements³ which can be used to remap keys. After the app is installed, we can use this rule⁴ called Map F4 to cmd+space.

You can import the rule from the above URL directly. Once the rule is imported & enabled, F4 will be remapped to cmd + space as shown in the video below.

Guide to setting up GeoDjango on Mac M1

Anand Reddy Pandikunta — Mon, 30 Oct 2023 03:29:23 GMT

There are a lot of guides on setting up GeoDjango and PostGIS. But most of them are outdated and doesn't work on Mac M1. In this article, let us look at how to set up GeoDjango on Mac M1/M2.

Ensure you have already installed Postgres on your Mac.

Install GeoDjango

The default GDAL version available on brew fails to install on Mac M1.

$ brew install gdal
==> cmake --build build
Last 15 lines from /Users/chillaranand/Library/Logs/Homebrew/gdal/02.cmake:
    [javac] Compiling 82 source files to /tmp/gdal-20231029-31808-1wl9085/gdal-3.7.2/build/swig/java/build/classes
    [javac] warning: [options] bootstrap class path not set in conjunction with -source 7
    [javac] error: Source option 7 is no longer supported. Use 8 or later.
    [javac] error: Target option 7 is no longer supported. Use 8 or later.

BUILD FAILED
/tmp/gdal-20231029-31808-1wl9085/gdal-3.7.2/swig/java/build.xml:25: Compile failed; see the compiler error output for details.

Total time: 0 seconds
gmake[2]: *** [swig/java/CMakeFiles/java_binding.dir/build.make:108: swig/java/gdal.jar] Error 1
gmake[2]: Leaving directory '/private/tmp/gdal-20231029-31808-1wl9085/gdal-3.7.2/build'
gmake[1]: *** [CMakeFiles/Makefile2:9108: swig/java/CMakeFiles/java_binding.dir/all] Error 2
gmake[1]: Leaving directory '/private/tmp/gdal-20231029-31808-1wl9085/gdal-3.7.2/build'
gmake: *** [Makefile:139: all] Error 2

We can use conda to install gdal. Create a new environment and install gdal in it.

$ conda create -n geodjango python=3.9
$ conda install -c conda-forge gdal
$ pip install django
$ pip install psycopg2-binary

Once installed, you can check the version using gdalinfo --version.

Remaining dependencies can be installed via brew.

$ brew install postgresql
$ brew install postgis
$ brew install libgeoip

Let's create a new django project and add spatial backends.

$ django-admin startproject geodjango

Add django.contrib.gis to INSTALLED_APPS in settings.py.

INSTALLED_APPS = [
    ...,
    'django.contrib.gis',
]

Add the following to DATABASES in settings.py.

DATABASES['default']['ENGINE'] = 'django.contrib.gis.db.backends.postgis'

Since we used conda to install gdal, we need to set the path to gdal in our django settings. Run locate libgdal.dylib to find the path to gdal.

GDAL_LIBRARY_PATH = '/opt/homebrew/anaconda3/envs/geodjango/lib/libgdal.dylib'

Similarly, we need to set GEOS_LIBRARY_PATH as well.

GEOS_LIBRARY_PATH = '/opt/homebrew/anaconda3/envs/geodjango/lib/libgeos_c.dylib'

Now, we can create a new app and add PointField or any other spatial fields to our models.

$ python manage.py startapp places

from django.contrib.gis.db import models

class Place(models.Model):
    name = models.CharField(max_length=100)
    location = models.PointField()

Conclusion

In this article, we looked at how to set up GeoDjango on Mac M1. We used conda to install gdal and brew to install other dependencies.

Periodically Launch an App in Background

Anand Reddy Pandikunta — Wed, 23 Aug 2023 13:33:49 GMT

I recently started using Outlook app on my Mac. If the app is closed, it won't send any notifications. When I accidentally close the app, until I re-open it, I won't get any notifications.

I want to ensure that it starts periodically so that I don't miss any notifications for meetings.

After trying out various methods, I ended up using open command with cron to launch the app every 15 minutes.

$ crontab -e

*/15 * * * * /usr/bin/open -a "Microsoft Outlook"

This will launch the app every 15 minutes. This is inconvenient as it will bring Outlook to foreground every 15 minutes.

To avoid this, I passed -g option to run it in background.

$ crontab -e

*/15 * * * * /usr/bin/open -g -a "Microsoft Outlook"

This silently launches the app in background without causing any disturbance. Since the app is running the background, it will send notifications for any meetings.

This will ensure that I don't miss any meetings, even if I close outlook accidentally.

Mastering HammerSpoon - Excel Automation

Anand Reddy Pandikunta — Sun, 21 May 2023 12:44:00 GMT

Introduction

Recently, I have been using Excel a lot. When opening a new Excel file, I have to do the following:

Maximize the window
Select all columns and fit them to its width
Apply filters to all columns
Freeze the first row

When opening and closing multiple Excel files, this becomes a tedious task. So, I decided to automate this and came across Hammerspoon.

HammerSpoon

Hammerspoon¹ is a powerful automation tool for macOS. It allows you to write Lua scripts to automate various tasks and make our keybindings.

First, let's install Hammerspoon using Homebrew.

$ brew install hammerspoon

We can write our automation script in ~/.hammerspoon/init.lua file. Let us see how we can automate the above tasks.

Automating Excel

-- excel
function excel(appObject)
   local win = hs.window.focusedWindow()
   if (not win) then
      return
   end
    win:maximize()

    appObject:selectMenuItem({"Edit", "Select all"})
    appObject:selectMenuItem({"Format", "Column", "Autofit Selection"})
    appObject:selectMenuItem({"Data", "Auto-filter"})

end)


function applicationWatcher(appName, eventType, appObject)
   local w = hs.application.watcher
   if (eventType == w.activated or eventType == w.launched) then
      if (appName == "Microsoft Excel") then
         excel(appObject)
      end
   end
end

This script will watch for application events and when Excel is launched or activated, it will call the excel function.

The excel function will maximize the window, select all columns and fit them to it's width, apply filters to all columns.

Free top row option is not available in the standard menu. So, I have added it to the quick access toolbar and click it via mouse event.

Conclusion

Hammerspoon is a powerful tool for various automation tasks. In addition to that it can replace a lot of utility apps like CheatSheet, BlueSnooze², Rectangle, ShiftIT³, HotKey etc. I have replaced most of the utility apps with Hammerspoon, and it is working great. I will be writing about it in detail in the upcoming posts.